What HSPF Means for You
You may have heard that heat pumps aren’t just for heating and cooling homes in mild climates anymore. Innovative advances in heat pump technology have created a legitimate heating alternative for colder regions where temperatures may drop below freezing. Today’s heat pumps are now being installed from Alaska to Florida.
But how can you check the heating efficiency of a heat pump? That’s when the Heating Season Performance Factor or HSPF comes in!
What is HSPF?
A heat pump’s heating efficiency rating is indicated by the HSPF number. That number represents the total heat output of a heat pump, including the supplementary electric heat, during the normal heating season in British Thermal Units or BTUs, as compared to the total electricity consumed in watt hours during the same period. The HSPF is a heat pump’s heating version of SEER* or Seasonal Energy Efficiency Ratio.
HSPF measures heat pump efficiency in heating mode
SEER measures heat pump efficiency in cooling mode
HSPF and Efficiency
In 2015, the U.S. Department of Energy raised the minimum energy efficiency standard for heat pumps to 14 SEER / 8.2 HSPF nationwide. That’s good news for homeowners in the market for a new heat pump. Typically, the higher the HSPF, the more efficient the heating performances of your heat pump.
If your heat pump is nearing its 10th birthday, it could have an HSPF rating less than 7.7. If this is the case, you may want to consider upgrading your heat pump to a high-efficiency model. A high-efficiency heat pump can boast HSPF ratings of 9 or higher, which may provide significant energy efficiency and savings on monthly heating bills when compared to a lower HSPF model operating under the same conditions.
However, the HSPF is only one of the factors affecting the overall efficiency of your heating system. Other circumstances that may significantly impact the performance of a heat pump include, but are not limited to: 5
- Air duct losses
- Climatic conditions
- Part-load efficiency
- Thermostat or control system settings
- Equipment sizing
If you are looking to save on monthly heating bills, the opportunity for additional savings may also be hidden in other areas of your home. Homeowners may improve the energy-efficiency by improving insulation, sealing air leaks, and repairing duct-work.
Moving Heat Energy
A heat pump is considered an energy-efficient heating option because it moves heat rather than converting it from fuel. When your thermostat or control system calls for warm air, the refrigerant in your heat pump’s coil extracts heat energy from the outdoor air. Even if it’s 32°F outside, there is enough heat energy in the air to heat the cooler indoor air.
In a split system, refrigerant warmed by the outdoor heat energy travels through closed piping to the indoor coil. The thermodynamic principles** of the refrigeration cycle then allow the heat energy from the refrigerant to be transferred to the cooler air that was pulled in from your interior spaces. The resulting heated air is then recirculated to your indoor spaces.
The thermodynamic principles of the reversed refrigeration cycle may allow properly installed heat pumps to deliver up to three times as much heat as the electrical energy used to operate them. This may make a heat pump a great energy-efficient option for your home.
Which HSPF is Right for You?
The efficiency ratings and features often contribute to the cost of a new heat pump. A higher HSPF with additional features may cost you more than a base model, but it may save you money over the life of the system.
When determining if a higher-efficiency heat pump is cost-effective for your budget, you should evaluate how long you intend to live with your new heat pump. Your anticipated length of home ownership may help to determine how long it would take to recuperate initial costs of a higher HSPF model heat pump.
- Are you currently in your “forever home”?
- How long will your current home suit your lifestyle?
- Do you plan to sell your home in the near future?
- Would a job change cause you to relocate?
In some areas of the country, heat pumps run nearly year-round – cooling in the summer and heating in the winter. For homeowners in these locations, you may want to consider upgrading to a high efficiency ENERGYSTAR® certified heat pump that will possibly save even more in energy costs than your current model.
Here are some things to know:
** SEER is used to measure the annual energy consumption and efficiency of a unit’s cooling ability in typical day-to-day use.
** Thermodynamics is the study of the effects of work, heat and energy on a system.
** Proper sizing and installation of equipment is critical to achieve optimal performance. Split system air conditioners and heat pumps must be matched with appropriate coil components to meet ENERGY STAR criteria.
AC Experts can assist you in determining which heat pump and HSPF rating are right for your home and budget.
Call AC Experts, AZ today: 480-386-6980
